Other automation NED RLU 220, UPP-15, DPD, etc.

TER-9 thermostats are used in ventilation systems in which air is heated by electric heaters.

Models: TER-9.

• Thermostats TER-9. Technical specifications

UPP soft starters are designed for smooth starting of engines with a power from 4 to 45 kW. The operation of the device is based on switching the engine power from a star to a triangle.

Models: UPP-7.5; UPP-11; UPP-15; UPP-22; UPP-30; UPP-37; UPP-45

• Soft-start devices UPP. Technical specifications

The RTF remote control device is designed for remote on/off of the ventilation unit, indication of the operating mode of the unit, as well as for changing the set temperature in the range from +5 to +35 °C.

• RTF remote control device. Technical specifications

The mechanical differential pressure switch DPD is used to control overpressure, pressure difference and vacuum in the air in the ducts of ventilation and air conditioning systems.

• Differential pressure switch DPD. Technical specifications

Protective relays STDT 16 and SET-10B are used to protect and start three-phase (STDT 16) and single-phase (SET-10B) motors with built-in thermal contacts.

• Protective relays STDT 16 and SET-10B. Technical specifications

Temperature sensors:

• The channel temperature sensor STK is designed to measure the air temperature in the channels of ventilation and air conditioning systems.
• The STP room temperature sensor is designed to measure air temperature in closed dry rooms, in residential, office and commercial premises.
• The STN outdoor temperature sensor is designed to measure outdoor air temperature, temperature in humid rooms, as well as as a weather sensor.
• The submersible temperature sensor VSP is designed to measure the temperature of the coolant in heating, ventilation and air conditioning systems.
• The VSN overhead temperature sensor is designed to measure the temperature of the coolant in the pipe

Models: STK-1; STK-1M; STK-2M; STK-3; STK-3M; STP; STP-3; STN; STN-3; VSP; VSP-3; VSN; VSN-3

• Temperature sensors. Technical specifications

The QPA air quality sensor is designed to analyze indoor air quality and to quantify the degree of saturation of indoor air with polluting gases.

• Air quality sensor QPA. Technical specifications

The SME And SMEX mixing units are designed to regulate the power of the air heater by changing the temperature of the water (non-freezing mixture) entering the heater at a constant flow rate. SME mixing units are equipped with a three-position drive ARA 663. SMEX mixing units are equipped with an ARA 659 servo drive, which is designed for proportional control.

Models:

• SME 40-1,0; SME 40-1,6; SME40-2,5; SME 40-4,0; SME 60-4,0; SME 60-6,3; SME 80-6,3; SME 80-10; SME 80-16; SME 110-16
• SMEX 40-1,0 VA; SMEX 40-1,6; SMEX 40-2,5; SMEX 40-4,0; SMEX 60-4,0; SMEX 60-6,3; SMEX 80-6,3; SMEX 80-10; SMEX 80-16; SMEX 110-16

• SME and SMEX mixing units. Technical specifications

DAB circulation pumps are designed for pumping water and non-freezing mixtures with temperatures from -10°C to +110°C. Maximum permissible operating pressure of the coolant: 1 MPa.

Models:

• VA 35/130; VA 65/130
• A 50/180 M; A 56/180 M; A 80/180 M; A 110/180 XM
• VRN 120/250.40M; VRN 60/280.50M; VRN 120/280.50M; VRN 150/280.50T; VRN 180/280.50T; VRN 60/340.65M; VRN 120/340.65T; VRN 150/340.65T; VRN 180/340.65T; VRN 120/360.80T; VRN 150/360.80T

• DAB circulation pumps. Technical specifications

Catalog